Parts Needed:
- Small flat head screwdriver
Before you begin:
- Make sure your security system is Disarmed
To Begin:
- Locate the slot opening on the bottom of your doorbell
- Take a small flathead screwdriver and press upward into the slot 
- While pressing the screwdriver upward, gently pull the doorbell away from the wall mount
- The doorbell will release from the wall mount causing it to power down
- Leave the doorbell disconnected for 2-3 minutes
- Align the doorbell back up with the wall mount and snap it back into place
- The doorbell will begin to boot up and may take up to 90 seconds to come back online
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article